Get the Flash Player to see this player.
Get the Flash Player to see this player.

Product Information


LUBE-A-BOOM GREASE LUBE-A-BOOM® GREASE

LUBE-A-BOOM® is a calcium sulfonate complex thickened lubricating grease formulated in a 100 percent synthetic base fluid specifically for use on cranes, aerial lifts, shooting boom forklifts, hydraulic telescoping excavators and material handling equipment.

Sizes: 400lb drum (p/n 010101), 120lb keg (p/n 010104), 35lb pail (p/n 010103), 7lb pail (p/n 010109), 14oz cartridge (p/n 010102) and 15oz shuttle tube (p/n LAB027)

View More Information | Download MSDS Sheet


LUBE-A-BOOM AEROSOL LUBE-A-BOOM® AEROSOL

Due to the success and popularity of the LUBE-A-BOOM® product in a grease form and requests from customers that it be produced in an aerosol, we are pleased to announce that it is now available in a spray can. The aerosol is excellent for applications such as aerial lifts; forklift masts and upper wear pads (areas that can be very difficult to get a lubricant into). It comes with a straw to allow the spray to be dispersed into a specific area.

Sizes: 15oz aerosol (p/n 010105)

View More Information | Download MSDS Sheet


LUBE-A-BOOM CLEAR AEROSOL LUBE-A-BOOM® CLEAR AEROSOL

LUBE-A-BOOM® CLEAR is a multi-purpose lubricant that can be used on components that slide, roll, rotate or squeak. When the solvent that allows the aerosol to spray evaporates from exposure to air, it leaves a clear anti-corrosive film impervious to water that prevents rust. It can also be used on most rubber seals and surfaces.

Sizes: 11oz aerosol (p/n LAB026)

View More Information | Download MSDS Sheet


LUBE-A-BOOM DRY FILM AEROSOL LUBE-A-BOOM® DRY FILM AEROSOL

This product provides a low-friction Dry Film that protects surfaces and reduces rust and corrosion. LUBE-A-BOOM® Dry Film provides similar benefits as the original LUBE-A-BOOM®, and can be used on sliding surfaces of heavy equipment, machinery and most applications where a dry lubricant is required.

Sizes: 12oz aerosol (p/n 010106)

View More Information | Download MSDS Sheet


LUBE-A-ROPE AEROSOL LUBE-A-ROPE™ AEROSOL

LUBE-A-ROPE™ Chain and Cable Lubricant is a thin lubricant that contains moly and graphite to provide maximum lubrication and protection.

Applications include chains, sprockets, cables, wire ropes, marine maintenance, industrial maintenance, drive chains, hoist chains, automotive maintenance.

Sizes: 16oz aerosol (p/n 010107)

View More Information | Download MSDS Sheet


LUBE-A-GEAR AEROSOL LUBE-A-GEAR™ AEROSOL

LUBE-A-GEAR™ is an open gear lubricant made with high quality residual stock and extreme pressure additives. This formulation is diluted with a flammable solvent that evaporates rapidly. The residue that is left on the gear surface is a tacky film that will not harden or flake off even at low temperatures. This grease will promote greater gear protection and is easy to apply under diverse conditions.

Sizes: 12oz aerosol (p/n 010108)

View More Information | Download MSDS Sheet


LUBE-A-PIN GREASE LUBE-A-PIN™ GREASE

LUBE-A-PIN™ is a NLGI #2 synthetic grease fortified with 5% molybdenum disulfide (moly) as well as other additives for pins/bushings and bearings that handles shock loads and resists water wash out. It is a heavy duty all purpose grease for all types of construction and industrial equipment including wet and dirty environments such as off-road and mining applications. It is environmentally friendly since it contains no antimony, lead, chlorine, zinc or other heavy metals.

Sizes: 400lb drum (p/n LAB025), 120lb keg (p/n LAB024), 35lb pail (p/n LAB023) and 14oz cartridge (p/n LAB022)

View More Information | Download MSDS Sheet


LUBE-A-BOOM GUN1 LUBE-A-BOOM® GUN1

LUBE-A-BOOM® GUN1 Spray Can Tool

Note: Product sold separately; not included with GUN1

Sizes: Universal (p/n GUN1)

View More Information


LubeJet-eco Spray Gun LubeJet-eco Spray Gun by MATO GmbH

This Air Operated Grease Spray Unit enables the spraying of LUBE-A-BOOM® grease direct from the Lube-Shuttle® cartridge without the need for propellants or chemical additives such as solvents. Adjustable grease flow, volume and spray pattern for precise spraying and uniform surface coating. Reduce grease costs, less mess, applies faster, uses all of the product in the tube. A cleaner solution for lubricating telescoping booms and other applications. Uses LUBE-A-BOOM® grease in a 15oz shuttle tube (p/n LAB027).

Sizes: LUBE-A-BOOM® Grease 15oz shuttle tube (p/n LAB027)

View More Information


LUBE-A-PAK LUBE-A-PAK™

LUBE-A-PAK™ contains all seven LUBE-A-BOOM® products in one easy carrying pak. Wipes included.

Sizes: Vary by included product types (p/n 0101011)

View More Information


ORIGINAL EQUIPMENT MANUFACTURERS USING LUBE-A-BOOM® PRODUCTS

Stellar Industries Inc., Garner, Iowa, a premier manufacturer of Tire Service Cranes and Tire Trucks, Hydraulic Hooklift Loaders, Telescopic Cranes and Mechanical Trucks, Air Compressors and Heavyduty Drawer Systems. Website: www.stellar-industries.com

SpanDeck, manufacturer of Mantis cranes is now using LUBE-A-BOOM® LUBRICANT.

Mantis cranes are known for their worthiness and reliability on projects as varied as powerline transmission, pipe laying, pile driving, foundation work, and bridge and tank construction. The Mantis' ability to pick and carry its entire load chart, rapidly deploy at the job site, and offer a wide variety of lifting configurations within a self-contained package sets it apart from the competition. More information is available at www.mantiscranes.com

Kiefer Mfg. Kanawha, Iowa uses LUBE-A-BOOM® AEROSOL for their specialty trailers.