:: LUBE-A-BOOM ::

DEALERS

About Us

Tech Data

Products

Dealer Login

MSDS

Technical Data for Original LUBE-A-BOOM® Grease and Aerosol Only
Friction Reducing Lubricants

LUBE-A-BOOM® is a calcium sulfonate complex thickened lubricating grease formulated with a 100 percent synthetic base fluid specifically for use on cranes, aerial lifts, shooting boom forklifts, hydraulic telescoping excavators and material handling equipment.

The synthetic fluid combined with an anti-oxidant provides stability for extended lubrication life. LUBE-A-BOOM® is fortified with molybdenum disulfide (moly) as well as Teflon®* to reduce friction encountered in sliding surfaces. Because LUBE-A-BOOM® meets or exceeds the specifications for EP-MPG and WPG grease, it can be used for other lubrication points on the machine.

LUBE-A-BOOM® has been tested for compatibility with wear pads and seals on mobile cranes and meets the specifications for Grove Equipment WPG and EP-MPG. LUBE-A-BOOM® contains no undesirable additives such as antimony, lead, chlorine, or zinc. Typical characteristic and benefits are listed below.

*TEFLON® is a registered trademark of DUPONT INDUSTRIES

** without solvent

BENEFITS INCLUDE:

	Water and saltwater resistance
	Remains free flowing in temperatures as low as -40°F
	Protects against rust and corrosion
	Smoother surface contact between wear pads and boom sections
	Compatible with most conventional lubricants
	Reduces friction and improves wear pad life
	Reduces maintenance intervals
	Non-toxic, protecting the user and environmentally friendly
	Outlasts petroleum based greases
	Won't run or drip in temperatures up to 300°F
	Formulated for telescoping booms

TYPICAL PROPERTIES

TYPE	DESCRIPTION
Thickener Type	Calcium Sulfonate Complex
Color	Gray
Texture	Smooth, Tacky
NLGI Grade	2
Penetration, D 217 worked 60	265-295
Dropping Point, D 2265 °F (°C)	600° (315°)
Copper Strip Corrosion, D 4048	1b
4-Ball Weld, D 2596, kg	400
4-Ball Wear, D 2266, scar dia. mm	0.44
Corrosion Prevention, D 1743	Pass
Water Washout, D 1264	3% max
Oxidation Stability, D 942, psi loss 100hrs	5 max
BASE FLUID CHARACTERISTICS
Viscosity @ 40°C, cSt	175-195
Viscosity @ 100°C, cSt	20-25
Viscosity Index	145
Pour Point, °F (°C) max	-31°F (-35°C)
Flash Point, C.O.C. °F (°C)	450°F (232°C)

AVAILABILITY

LUBE-A-BOOM®
is available in a New 15oz. Aerosol, 14oz. cartridge/10 Pack, 35lb. pails, 120lb. kegs, 400lb. drums.

Turntable Bearings
LUBE-A-BOOM® has also been formulated for turntable bearings allowing you to use one lubricant. Some manufacturers recommend a water pump grease (WPG) and LUBE-A-BOOM® meets or exceeds those specifications including ASTM-D1264 for water resistance.

Note: Some EP-MPG (multi purpose grease) do not meet the WPG specification.

LAB, LLC
PO Box 20798 • Indianapolis, Indiana 46220 •
Telephone: 317-501-1104 • Fax: 317.577.0637 • eMail: sales@lubeaboom.com