TESTIMONIALS 

At Crane Rental and Rigging we have used lots of different greases in the past to find the right grease to keep our booms sliding smooth. We found 

LUBE-A-BOOM® to perform to our standards in the heat as well as the severe cold. We tested LUBE-A-BOOM® on our Grove GMK 5180 and LTM1400 Liebherr. We found it to outperform any previous greases. We now use the product company wide and have not seen any problems with boom wear pad wear and we have not had to re-grease as frequently as before.

Dennis Brockhaus

Crane Rental & Rigging

Service Manager, Sioux City, IA & Sioux Falls, SD

www.cranerent.com

Mike's Crane Service of St. Lucie County, Inc.

Port St. Lucie, FL

We own two Grove TMS 250's, a Terex T340 and a TMS 500E.  When we purchased our Terex T340, there was a squealing noise coming from the turntable bearing.  We were using a conventional grease. We tried LUBE-A-BOOM®.  Since that day the noise went away. We have continued to use this product on all of our truck cranes from that day on.   

Mike Beausoleil, President
  

BOSCO CRANE

Westwood, MA

When Bosco's Cranes' 65 ton Tadano All Terrain Crane boom was not sequencing, they called Flaherty Equipment Repair, Inc.   Upon examining the boom, Mike Flaherty found that BOSCO CRANE had the wrong type of lubricant on the boom.   The lube they were using was too sticky for proper functioning.   The boom was cleaned and LUBE-A-BOOM® was applied.   There have been no further problems with this boom.

 Flahertyequip@aol.com

Earthwave Technologies, Inc
Indianapolis, IN

“While restoring my Correct Craft inboard boat there was plenty of areas that needed attention, like seat tracks, cables, and engine parts.  Nothing that I could find really seemed to stand out for superior water resistance until I tried LUBE-A-BOOM® . Not only did it work great as a lubrication, it worked wonders on colored interior fiberglass parts bringing back color and leaving a very light coating that holds up to the rigors of water and sun.  Since the project completion I always keep a can with the boat and it works great on my submergible trailer too!” Mike Paredes, VP

Advanced Overhead Crane

Crosby, TX

Finally! There is one company that satisfies all our lubrication requirements and the best part is, it is reasonably priced.  Whether we need to lubricate a load cable, load chain or pinion gear LUBE-A-BOOM® has the right product for the application.  Richard Wehrmeister

 www.advancedoverheadcrane.com

Santana Crane, Inc.

Salem, OR

Owns: Terex and National Boom Trucks

Products:   Uses LUBE-A-BOOM® grease, LUBE-A-BOOM® AEROSOL, LUBE-A-GEAR and LUBE-A-ROPE

We use LUBE-A-BOOM® because it works in all weather conditions, from cold rain to extreme heat, stopping the chatter caused by telescoping the boom in and out.   The aerosol spray can allows employees to apply the product easily, making lubrication maintenance hassle-free.   John Santana

www.santanacrane.com

WHECO Corporation

Corporate Office: Richland, WA

Austin Sales Office:  Georgetown, TX

Service Centers: Aiken, SC    La Mirada, CA      Seattle, WA     Kwajalein, Marshall Islands

An Industry leader in engineered structural crane repair and restoration.

WHECO uses LUBE-A-BOOM® because it is easy to apply, maintains its consistency regardless of temperature (doesn't get firm in the cold or gooey in the heat) and it just works better than traditional boom lubricants products.   Mark Williams, Project Manager

www.wheco.com

Parker Machinery

Indianapolis, IN

Rigging, millwright and equipment rental

Types of equipment:  Taylor forklifts, Grove and Broderson cranes

Along with our rigging and millwright business, our industrial forklifts and cranes share time in our rental fleet.  Because  of the harsh environments our fleet is subjected to, some at foundries, we have found the perfect solution for fork carriages, booms and outriggers.   "All equipment is prepped for jobs and rentals with LUBE-A-BOOM®  DRY FILM and LUBE-A-ROPE™ lubricants before leaving the shop, period".  Robert Parker

Egan Crane & Rigging Service

Melbourne, FL

Cranes and Rigging

Types of equipment:   Grove Cranes

LUBE-A-BOOM®  works on boom sliders better than grease and lasts longer.   Also, we use it on our jib pins that makes it easier to erect and they do not rust.   We have been using it on our Grove cranes for the last three years.   Andy Egan/ Owner

Send us your testimony

LAB, LLC reserves the right to not use or publish all testimonies.