Get the Flash Player to see this player.

LUBE-A-BOOM® Grease


400lb drum

P/N 010101



120lb keg

010104



35lb pail

P/N 010103



7lb pail

P/N 010109



14oz cartridge

P/N 010102

LUBE-A-BOOM® is a calcium sulfonate complex thickened lubricating grease formulated in a 100 percent synthetic base fluid specifically for use on cranes, aerial lifts, shooting boom forklifts, hydraulic telescoping excavators and material handling equipment.

The synthetic fluid combined with an anti-oxidant provides stability for extended lubrication life. LUBE-A-BOOM® is fortified with molybdenum disulfide (moly) as well as Teflon®* to reduce friction encountered in sliding surfaces. Because LUBE-A-BOOM® meets or exceeds the specifications for EP-MPG and WPG grease, it can be used for other lubrication points on the machine.

LUBE-A-BOOM® has been tested for compatibility with wear pads and seals on mobile cranes and meets the specifications for Grove Equipment WPG and EP-MPG. LUBE-A-BOOM® contains no undesirable additives such as antimony, lead, chlorine, or zinc. Typical characteristic and benefits are listed below.

*TEFLON® is a registered trademark of DUPONT INDUSTRIES

BENEFITS INCLUDE:

• Water and saltwater resistance
• Remains free flowing in temperatures as low as -40°F
• Protects against rust and corrosion
• Smoother surface contact between wear pads and boom sections
• Compatible with most conventional lubricants
• Reduces friction and improves wear pad life
• Reduces maintenance intervals
• Non-toxic, protecting the user and environmentally friendly
• Outlasts petroleum based greases
• Won't run or drip in temperatures up to 300°F
• Formulated for telescoping booms

TYPICAL PROPERTIES

TYPE
DESCRIPTION
Thickener Type Calcium Sulfonate Complex
Color Gray
Texture Smooth, Tacky
NLGI Grade 2
Penetration, D 217 worked 60 265-295
Dropping Point, D 2265 °F (°C) 600° (315°)
Copper Strip Corrosion, D 4048
1b
4-Ball Weld, D 2596, kg
400
4-Ball Wear, D 2266, scar dia. mm 0.44
Corrosion Prevention, D 1743 Pass
Water Washout, D 1264 3% max
Oxidation Stability, D 942, psi loss 100hrs 5 max
BASE FLUID CHARACTERISTICS
Viscosity @ 40°C, cSt
175-195
Viscosity @ 100°C, cSt 20-25
Viscosity Index 145
Pour Point, °F (°C) max -31°F (-35°C)
Flash Point, C.O.C. °F (°C) 450°F (232°C)